RG570 Engine and rolling chassis

---

I have a 570 engine and a load of RG bits I'm selling as a job lot for £6k. Or I might sell the engine with std gearbox and clutch for £5k

Ring me if you are interested NO PX

RG570 engine barrels
PV fitted but no actuator mechanisms for the cables
PV motor
Cables, I think they are PV cables but unsure
Std ignition
Heads with thermostat and temp sensor
8 x disk valves
4 x disk valve covers (need new coating)
2 x std gearbox
3 x std clutch with some Mark Dent shims
4 crank webs, don't know if it's a front or rear sorry
Oil pump
4 x std carbs
2 x race looms incl ignition boxes
regulator
2 x coils
Engine bolts

RGB fibreglass fairing with 2 x nose cones

RG400 frame with V5
footpegs
2 x clip ons
Bag of spindles
2 x std swing arms 1 x wheel adjusters
1 x std triple clamps (needs bottom bearing)
1 x std forks (need re-chrome)
1 x shorter forks (wider and shorter than std, won't fit these yokes but I think the internals are the same)
1 x std front wheel
4 x front disks (some are knackered)
1 x straight spoke RF600 front wheel 17x3.5
1 x curved spoke GSX600 front wheel 17x3.5
1 x curved spoke RGV front wheel 17x3.0
1 x speedo drive
2 x std rear wheels carrier cush drive rubbers and disk
1 x gsxr400 rear wheel carrier cush drive rubbers and disk with spacers to fit std spindle and swing arm
1 x gsxr400 underslung rear brake

Big pile of std exhausts

Plus anything else I can find to throw in, but it will be duplicates of the above

No tank
No Radiator or hoses
No clocks
No ignition switch
No Indicators

First person to turn up with a van and £6k can drive it all away